Skip to main content

Month: June 2012

Top Paint Picks for Navy Blue Walls

Yesterday I shared my Royal Blue Revelation and how I’ve been introducing this new-found hue into my home. I’m kinda psyched because not only is this color going to be an accent seen in accessories, but I plan on painting the front room a dark navy.  Yesterday I left you at the point of me knee-deep in color decisions, and today I’m sharing the final color choice, plus my Top Color Picks for Navy Blue Walls.

I’ve always had a thing for black spaces – they’re bold, dramatic, and striking – but I’m loving the navy hue just as much (and maybe even better)!  I’ve gathered some inspirational spaces that adorn the blue hue…

Deep blue striking walls with navy accents, photography by Emily Jenkins Followill.

Gorgeous Royal Blue Dining Room featured on House Beautiful.


Crisp white with navy blue is stunning.  The white decor pops off the dark complementing color (source unknown).

Navy paneling on the walls gives this office/den a cottage look featured on Lonny Mag.

Dark royal blue walls surround this bedroom oasis and I adore the wide striped blue and white rug, photographed by Roger Davies Photography.

A laundry room that I would never leave.  The white cabinets look amazing against the dark royal wall featured on House and Home.

Built-ins are often a shade of white (allowing them to pop off the wall), but the style displayed in this room match the walls – clever!  Love the regal, but inviting aesthetic by Ashley Whittaker.

Hello Bedroom that I would love-to-live-in!  There are so many reasons to adore this space by Brian Watford Interiors, but my favorite is the navy and white oversized nightstand, which is so sophisticated.

Thankfully I’m still in love with my taupe colored cabinets, otherwise this would be my new DIY project for summer.  Could you do navy blue cabinets in your kitchen? (source unknown)

Incredible spaces to die for, right?! So finally the time comes to reveal the final paint choice for my room.  The final color is…

photo by Julian Wass, image via House Beautiful

Boy, do I only wish I knew photoshop better to show you how this new blue hue would look in the room.  Any volunteers to help me out? If not, no worries, it will be done soon enough (I hope)!

Do you like my color choice?  What navy blue hue is your favorite?

Upcycled Clock Turned Vintage Sunburst Mirror

A few weeks ago while driving through my neighborhood, I spotted a sign for a garage sale.  As always, my garage-sale-radar automatically went into effect, and I quickly turned the wheel down the street and started my typical slow-drive-by.  While still in the car, I immediately spotted a gold antiqued-looking clock. Of course, I had to stop!

Just like my radar noticed, it was in good condition and I knew exactly what I wanted to do with it – turn it from a clock into a sunburst mirror.

To change this clock into a mirror, the only item I needed was a 12″ round beveled-edge mirror which I found and purchased from AC Moore for $4 (it was actually $8 but I had a 50% coupon – score).

I applied my go-to-adhesive, Liquid Nails, to adhere the mirror to the center of the clock to cover the numbers.

Unfortunately, it didn’t work – the adhesive wasn’t strong enough to hold the mirror 🙁

I was pretty bummed, but onto plan B…  A stronger adhesive.  Situations always work out as they should because when the Liquid Nails didn’t work, it gave me the chance to add alittle color to the edge of the mirror – a detail I hadn’t thought about before.

So before adhering the mirror, I painted the outer section of the clock with a navy blue colored craft paint.

THEN, it was time to add the mirror back for the second time.  This attempt, I used a 5-minute-dry epoxy.

This had to work!

And it did – I was a happy girl again 🙂

And here’s the result…

Well HELLO!

So why did I choose blue for the accent color?  Well I’ve been adding in some royal blue accents as of late – take a look.

Through the new sunburst mirror, you get to take a peak at the lamps that I just revamped last week.

And there it is… A fun and easy update!

Have you upcycled a garage sale find lately?

I link my projects to some of these parties: Skip to My Lou, Dittle Dattle, Between Naps on the Porch, Today’s Creative Blog, Stories of A to Z, All Things Heart & Home, Savvy Southern Style, House of Hepworths, Finding Fabulous, Creation Corner, The Shabby Nest, Tatertots and Jello, Thrifty Decor Chick, Tip Junkie

DIY Stair Makeover: REVEAL

The day has finally arrived for me to share the final reveal of my staircase makeover.

Alot of progress has been made since I announced and started this latest DIY endeavour only 3 weeks ago.  It’s amazing how one change can totally impact the aesthetic of a space.  As you know, my home is my experimental playground which is constantly work in progress, and this stair makeover has been an incredible update.

Take a look at the result…

And here is the progress that I’ve made from start to finish…

Amazing change, right?!

Since my last post where I left you off at the staining of the stair treads, I’ve been a non-stop painting machine! And actually, I’m still painting (which I’ll get to more in a bit).  After the filling of the holes, the sanding of the wood, and the staining of the treads, it was time to paint the stair risers, the balusters, and the banister – and that’s what I’ll be sharing details about in this post.

In my last post, I left you off here…

So after that, it was time to prime!

Whenever I have a big painting job (like my kitchen makeover last summer), I always turn to Benjamin Moore as my go-to paint line.  Their paints are of really high quality and it applies with an effortless manor.  Since this project was pretty big, I immediately turned to them for assistance and they kindly donated the product for this project (Thanks BM – I love you)!  Their Aura paint line is like no other and actually has a primer built-in (which is why my kitchen cabinets came out so great and still look as fabulous today).  BUT, since I was working with a white hue, I thought it would be best to use an actual primer FIRST, then the Aura paint on top.

To start off, I first taped off all the areas that weren’t to be covered with the primer and that was basically just the newly stained treads and the surrounding walls.

Once everything was properly taped, it was time to apply one coat of Benjamin Moore Fresh Start Primer.  I learned recently that the primer coat does not need to be a thick coat  – a thin coat just to cover the wood surface is perfect.  As long as your coating the wood, it’s blocking the stain from coming through and preparing the surface for the paint color.

All primed and ready for paint!

Once the primer was dry, which didn’t take long (the stairs were thirsty!), it was time for the 2 coats of Benjamin Moore Aura paint.  For this project, I chose the color Snowfall White, which is essentially white, but has a slightly warmer hue (no blue undertones).

And of course I’m using my favorite Purdy Brushes 😉 (I wasn’t paid to say that – just sharin’ the love).

I mentioned that I applied 2 coats of paint, but in some areas a 3rd coat was needed.  Thin layers of paint are better than thick, so 3-4 coats isn’t unlikely.  It’s best to apply thinner coats than to end up with drips!  If you do though (like me), continue to go over the drips with your brush.  To avoid fast drying paint so you can fix those drips, it’s important to use a paint additive like Floetrol.  Learn more about that from my post on Tips for Painting Furniture.

The painting around the balusters took a long time and it was the most grueling part, but honestly looking back, it wasn’t that bad and it’s done – YAY!  Once I was finished with the white areas (the risers and the balusters), it was time to paint the newel post and banister.  A few people thought I was crazy when I said I was going to paint the post and banister instead of staining it to match the treads, but I’m glad I stuck with the idea, because I love it!

I decided to use the same color as my kitchen cabinets which is Benjamin Moore Texas Leather. It was one of my all-time favorite colors and can be seen here and there throughout my home.  Painting the post and railing gave the stairs a unique touch rather than a typical stained railing.

One itty bitty part that I didn’t mention above when painting the risers white was that there was a large gap at the edge where the treads and risers meet.  When painting, I didn’t have to be perfect with the white paint because I knew I would be adding a small piece of cove moulding afterwards.  Take a look…

I found the cove moulding at Lowe’s and it was about $2.50 for an 8′ long piece.  It actually wasn’t wood and instead a plastic composite. (The wood version was $5+, so this less expensive version was just fine).  At this point of the project, I dragged the Mister  back in to help out.  He measured the length of each tread and cut the cove moulding using a miter box.

Using Liquid Nails, we adhered the moulding to the tread/riser to cover the gap.

And Voila, the gap was hidden!

Once the paint was completely dry, the unveiling was about to begin a.k.a. the removal of the painters tape…

A little trick that I’ve learned along the way is to score the joint where the tape and the painted surface meet with a sharp razor.

This allows the tape to be easily removed and avoids the paint from coming off where it’s supposed to stick (see below where I didn’t score the joint).

Once the tape had all been removed, the stairs were basically done – not too bad right?!

And now it’s time for a ton of pictures (I hope you don’t mind)!

Looking from the front room into the foyer

Close up of the banister

The stenciled foyer wall looking into the front room

Psst…  You probably didn’t realize, but check out all the mouldings in the foyer and front room – I painted them white too. YES, as I was painting the stairs, I just continued right around the room (+ the dining room and kitchen).  Those oak mouldings had to go!  My goodness, the house feels so much fresher now – more on that soon.

That’s a whole lotta dark wood and I love it 🙂

I definitely was apprehensive about removing the carpet from the stairs and risking the possibility that one of my young kiddos (or me) could fall – carpet has a lot more padding than hard wood.  Thankfully this is my awesome solution…

Sisal Carpet Treads!

These carpet treads are perfect and I love them.  The kind folks at Natural Area Rugs sent me these attractive woven sisal treads which have a cotton twill border and non-slip back.  They’re ideal for giving the added protection for people walking up/down the stairs, plus they protect the actual stairs.  After all that work, the last thing I’d want are scuffs and scrapes!  But the beauty is that you can still see much of the stairs unlike a typical stair runner which covers the treads and risers.

The carpet treads have velcro on the back, so they easily attach to the stairs with a sticky back.

I’m ecstatic about this solution!

And it’s complete! What do you think?  Have you ever considered giving your stairs a makeover? Thank you for following along over the past few weeks!

Related Posts:
The Beginning of a New DIY Project
Phase 1: A New DIY Venture Begins
Phase 2: Filling Holes & Staining Treads
Kitchen Makeover Reveal
Stenciled Foyer Wall

Monogrammed Chevron Pallet Tray

As a Blogger, finding support throughout the blogging community is important for blog growth, friendship, and creative inspiration. For the past several weeks, I’ve joined forces with a few fabulous DIY bloggers and we’ve been helping each other with various aspects of blogging.  Along with our helpful “chats”, we were given a Blogging Challenge by Beckie of Infarrantly Creative to create a DIY project using specific materials – additional items could be added, but it was a must to use the required five.

What did I create you ask?

Well take a look… (and then keep on reading for the details)

Included in our Blogging 2 Better group was Monica & Jess of East Coast Creative, Allison of House of Hepworths, Brook of Being Brook, and Kim of Sand & Sisalall incredibly talented and inspiring women and friends!

To begin, this is the list of items that we were required to use, and actually I pretty much just stuck to the list and didn’t use many additional items.

Fun, but definitely challenging!  I was quite nervous at first trying to think about what to create with these 5 items and then it came to me…  A tray that would be perfect to bring items in and out while BBQing (or even just to display on the coffee table – you know I love trays).

Once I had the idea, my project was quickly underway, especially since I already had a stash of pallets in my garage for a few other projects.

Item #1 – Pallet

To start off, I determined the size of the tray that I wanted to make (17″ x 17″), so the Mister and I measured (4) 17″ long pallet pieces.

Using the reciprocating saw, we buzzed right through that wood :-/

I’m always leary about using the BIG TOOLS (even though my friend Brittany has empowered me with the right skills), but I helped out and made a boo-boo when cutting. No problemo – the Mister came to the rescue with his Band Saw and cleaned the edges right up.  In no time the (4) pieces of pallet were ready to make into a box.

Lining up the corners of the pallet planks, we hammered 2 nails into each corner.

Onto the bottom of the tray…

The only material used that wasn’t on the list was a piece of 1/8″ thick plywood that I used for the bottom of the tray.  Once the pallet “frame” was made, we measured the distance to the outer edges and cut it using the Band Saw.

Once the plywood was cut to the right dimensions, we nailed it onto the bottom of the pallet “frame”.

I gave the overall tray a quick sanding, and within 20 minutes it was done!

Now onto the fun part…  Using my second and third required items, fabric and Mod Podge, I lined the bottom of the tray with a brown and white chevron fabric.

To start off, I spread a nice coat of Mod Podge along the entire bottom of the tray.

Item #2 Mod Podge

Then I added the fabric onto the glue-y surface and made sure to get it nicely in the corners as well.  Make sure the fabric size is larger than the surface because in the next step, I’ll show you how I trimmed it.

Item #3 – Fabric

Once the fabric was well stuck to the Mod Podge, it was time to trim the fabric (this can be done before the glue underneath is dry).  Using a very sharp blade, I dragged it along the edge of the tray to trim the excess fabric.

Once the fabric was cut, I add a layer of Mod Podge OVER the fabric – no worries, it will dry clear!

Once the Mod Podge was dry (fully about 1 day later), it was time to add my last 2 items – the stencil and the color coral.

Using a new Word Doc, I found a font I liked (credit valley) and printed a large letter ‘B’ in lowercase for Burger (my last name).  Then I cut it out with a scissor and traced the outline on the fabric.

Item #4 – Stencil

Then filled in the stencil with a beautiful color coral (it needed about 4 coats, but it didn’t take long).

Item #5 – Coral

And here it is all complete!  My Blogging 2 Better Challenge was done and I was quite happy with the result.  What do you think?  Perfect for the indoors or out!

And you of course have to check out the other B2B Challenge Projects using the same materials.  It’s truly amazing how they’re all SO DIFFERENT!

Rustic Industrial Storage Bins by Monica & Jess of East Coast Creative Blog

Dangle Earring Frame by Allison of House of Hepworths

Fabric Wall Art by Brook of Being Brook

Pallet Art Surfboard by Kim of Sand & Sisal

I’m sure you know all these ladies, but if not, you are REALLY missing out!  Be sure to visit each of their great Challenge projects, as well as their daily DIY creations.

I link my projects to some of these parties: Skip to My Lou, Dittle Dattle, Between Naps on the Porch, Today’s Creative Blog, Stories of A to Z, All Things Heart & Home, Savvy Southern Style, House of Hepworths, Finding Fabulous, Creation Corner, The Shabby Nest, Tatertots and Jello, Thrifty Decor Chick, Tip Junkie

5 Minute Lamp Revamp with Spray Paint and Ribbon

For a while, I was on the hunt for a pair of lamps for the dining room buffet. They couldn’t be overly large, but something that would be unique and add a soft glow.  I had brought home a few options, but nothing was quite right.  Then one day when randomly shopping at HomeGoods for another project, I spotted this treasure –>

It wasn’t perfect, but immediately I had an idea up my sleeve.

Could I ever just leave anything alone?  NOPE!

My immediate idea was to spray paint the globe, but I wasn’t sure what color.  Should the lamp be subtle or dramatic?  Since the lamps were a nice piece of change (around $30 x 2), I thought a quieter color would “live” longer.  So, I hit up my favorite spot at my favorite home improvement store and chose a taupe color with a hint of gold.  Interesting, right?

The color name is Caramel Latte  – sounds scrumptious (I must have missed my morning coffee that day and got my fix another way, hehe).

Before starting the exciting transformation, I covered all the areas of the lamp that I wanted to protect.  So ONLY the basket-style globe was exposed and ready.

Now, I was armed and ready! I started off spraying my new fav color on the black globe area of the lamp. Nope, didn’t work. 

I wanted it to be lighter, so instead I first spray painted the globe white (basically as a primer)…

…THEN applied the Caramel Latte Color.  Yes, that’s what I wanted!

Perfection – DONE! well maybe not?

You know me…  I can never leave well enough alone.  I wanted to embellish the shades a little, so I decided to add two rows of ribbon in a taupe and burnt orange color.

Adding Ribbon to Embellish a Shade

  1. At the lampshade seam, dab a small amount of hot glue on the shade and attach one end of the ribbon.
  2. Wrap the ribbon around the entire shade (no need to glue all the way around). Trim the ribbon, fold over the edge so it doesn’t fray, and glue.
  3. Complete!

In about 10 minutes (well, for me it was 20 because I had two), these lamps got a total makeover and are completely unique for my space!

I hope I’ve inspired you with my Lamp Revamp to think-outside-the-box and create or transform something in your home.  Sometimes with a little spray paint and an idea, your options are limitless!

I link my projects to some of these parties: Skip to My Lou, Dittle Dattle, Between Naps on the Porch, Today’s Creative Blog, Stories of A to Z, All Things Heart & Home, Savvy Southern Style, House of Hepworths, Finding Fabulous, Creation Corner, The Shabby Nest, Tatertots and Jello, Thrifty Decor Chick, Tip Junkie

Outdoor Sculpture Made From Trash

DIY: Outdoor Sculpture using metal straps from an old barrel. Big impact with little work + no cost!

I hope you had a wonderful weekend!  It was a half rainy, half sunny weekend in my neck of the woods, so I took the opportunity to do some thrifting with my mom on Saturday and then some major DIYing on Sunday.  I actually worked on about 6 different DIY projects and am super psyched to share some of them over the next week or two.

One project in particular is a new outdoor sculpture that now sits in my garden that I made using, well…  trash.  It’s kinda crazy, but I love it!

Before the cleanout began for the sideyard makeover (which I’ve mentioned here and there over the last few months), there was an old wood barrel planter sitting in the corner, falling apart, and in desperate need for the trash.  When the time came for the barrel to hit the garbage, there was a DIY fairy that sat on my shoulder telling me to keep the corroded metal straps that once, long ago, kept the barrel together.


I had NO IDEA what I would do with them, but in the shed they went… for about two months… until the revelation hit me… How about making them into a sculpture??  Hmmm… That could work!

There was part of the garden on the sideyard that was bare and instead of planting more flowers, the vacant spot was perfect for my new-found idea.

How to Make the Trash Turned Sculpture

This sculpture took minutes to make – probably less than 10 minutes in all!  Using a drill with a metal drill bit, the Mister and I worked together and drilled 2 holes in each ring.  The holes were placed directly opposite of each other.

Once all the holes were drilled, we aligned the top and bottom holes of each ring.  We secured the rings at the top with a nut and bolt, and for the bottom, we used a 6″ tent stake which went into the ground.

And that was it!  I rotated the rings until the positioning was just right, and then sat back to admire this trash to treasure.

So what do you think?  Pretty neat, right?
What treasures have you made from trash?

I link my projects to some of these parties: Skip to My Lou, Dittle Dattle, Between Naps on the Porch, Today’s Creative Blog, Stories of A to Z, All Things Heart & Home, Savvy Southern Style, House of Hepworths, Finding Fabulous, Creation Corner, The Shabby Nest, Tatertots and Jello, Thrifty Decor Chick, Tip Junkie

Staircase Makeover: Filling Holes and Staining Treads

It’s almost been 2 weeks since I posted about the stair makeover, but don’t think I haven’t been hard at work.  The staining took quite a long time and not because it was difficult, but for another reason – keep on reading.  Anyway, I can officially say that the staining is complete and I am at the half way point now (I hope).

This second phase of the staircase makeover covers sanding the stairs, filling the gazillion holes from the carpet tacks and staples, and staining the treads. So let’s jump right in and get started!

Project Details

Duration of Phase Two: 1.5 hours for sanding & filling holes; 2 overall hours for staining / polyurethane (5-10 minutes for each coat)
Phase 2 Difficulty: Easy to Medium
How Many People Needed: 1

The supplies I used for this phase of the project are:

  • Orbital Sander (sandpapering by hand is also possible, but will take longer)
  • Wood Filler (in a color to match the wood)
  • Stain – I used Minwax Wood Finish in Ebony
  • Polyurethane – I used Rustoleum (water-based) in a gloss finish
  • Cheap brush or sponge brush that can easily be thrown away
  • Mineral Spirits (if you don’t want to use a cheap brush and instead wash them)

In my last post on removing the carpet and prepping the stairs, I left you off with this…

Once the carpet tacks and staples were fully removed, it was time to sand the stairs.

As I mentioned above in the supply list, I used my orbital sander to get a really smooth finish and to take away marks and old paint drippings.  Manually sanding the treads and risers with sandpaper is fine too, but will take longer and is more laborious – if you’re looking to build your arm muscles, this may be your calling 😉

Once the stairs were smooth, I used wood filler to fill in the many holes left from the carpet strip tacks and the carpet pad staples.  There were also a few holes from the natural grain of the wood that I also filled in.

After the holes were filled and the wood filler was completely dried and hard 24+ hours later (it’s important that the wood filler is really dry!), I sanded again.  The wood treads were ready for staining when the stairs were completely smooth to the touch.

Now to the staining process…

I don’t have alot of staining experience, and frankly staining has always scared me.  Unlike painting, it seems so difficult, but thankfully I was proven wrong with this project.

As I mentioned in my last post, I was desiring a really dark stained tread for the stairs, so I chose to use an ebony finish.  Before making the final decision though, I reached out to my blogging bud and the very talented DIYer, Kate of Centsational Girl.  I had showcased her stair makeover as one of my inspirations, and wanted to know what she used for her dark tread.  She told me that she used a product called Duraseal, which has a molasses-like consistency and gave a darker finish because it was less watery than typical stain.  I couldn’t find the Duraseal and was anxious to get started on the staining, so I chose to use Minwax Wood Finish in ebony.  It was the darkest color they had, so I was up for the task of trying it out.  As an alternative, Kate gave me the advice of trying a gel stain which like the Duraseal has a thicker consistency.  I’m a bad girl because I didn’t take her advice, BUT thankfully I’m happy with the result I achieved, so all is good 🙂

When staining, it’s key to apply thin coats of stain and angle the brush at a 45 degree angle to avoid bubbles.  After cleaning the stairs with a rag to remove any remaining dust from the sanding, I was ready to get started. I used a cheap bristle brush to apply the stain, so I could easily throw it away after the stain applications.

Here are the few steps I took to stain the treads.

1. I started at the corner of the treads.

2. I feathered my brush towards the center, parallel to the wood grain.

3. Then I carefully dragged my brush along the edge of the tread and the stair stringer.

4.. After that I feathered the stain in the same direction of the grain again.

The reason for doing these steps is so the tread is thoroughly covered with stain AND minimal stain gets on the stringer (side piece).  For my stairs, I will be painting the stringer white and using a stain blocker beforehand, BUT I was nervous (here comes my apprehension of using stain again) and didn’t want too much stain to get onto the stringer.  Alittle nutty, I know… but it worked.

Continuing with the staining, I applied it to the remainder of the tread in the same direction as the wood grain.

Now that I shared the particulars on how to stain, let me tell you some more details…

The staining process took a while and the major reason was because we still needed to use the stairs.  What to do??  Well, I ended up staining every other stair so we could still get up to the second floors. We did need to sleep, of course 😉

So… because I had to break the project up into two phases, it took longer.  After applying the first coat of stain, it soaked right into the wood, and was dry within about 1-2 hours – there was absolutely no wiping away needed.

Then I applied a second coat of stain, which also soaked right in and took about 1-2 hours to completely dry.  At this point, the stair had a really dull finish to it, but it still wasn’t dark enough for my taste.

So a day later, I added a third coat of stain and that was key!! It took a good day for it to completely dry, but I was happy. Then I was able to move on to the other stairs that were still raw.

The more coats you apply, the darker the result

Once the third coat of stain was complete, I sealed the stairs with Polyurethane.  I had tested one small area using a semi-gloss finish, but it wasn’t right, so I decided on a gloss finish.  It gave just enough sheen, but wasn’t overly glossy (if that makes sense).

Kate recommended applying 2-3 coats of polyurethane and this time I took her advice.  After all my hard work, I wouldn’t want these stairs to get ruined!

The polyurethane that I used had a blue tinge when applied (which I freaked out about for only a few seconds), but quickly went away – thank goodness!

And that’s it for the staining process.  This same process and techniques could also be used for furniture.

I got a few comments from readers after my last post that they enjoyed how thorough and explanatory my post was, so I tried to do the same with this – I hope you enjoyed it and learned something new.  If you still have questions, let me know!

It’s really coming along and I’m excitedly anxious to start the next process… painting the risers, banister, baluster, and stringer! Until next time…