Skip to main content

Tag: DIY decorative trim

DIY: Drop Cloth Curtain Panels with Leading Edge Detail

I’ll be honest, none of the window curtain panels in my home cost more than $50.  Yet all are custom made.  Not by an uber-expensive fabricator, but by me.

Store-bought and/or custom-made curtain panels can be very pricey, but the same look (or better) can be achieved by making your own.  And guess what, it’s not difficult…

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COM

 

As the calendar turns and another Fall approaches, Lowe’s put The Team to the test this month to create a new window treatment for the home.  I was in need (well more like a want) of new window panels for the dining room, so I knew it was the perfect spot to get my craft on.

I desired something simple, so instead of stopping at the curtain aisle for a typical drape, I headed towards the paint aisle and landed in the drop cloth section.  confession: I can close my eyes and always find the drop cloth section… I’ve confessed my love for drop cloth before, but honestly it is The. Best. Material. hands down.  You can do so much with drop cloth material.  It’s not just for painters!!

Anyway, onto the new panels…

1. At Lowes, I chose a 6 ft. x 9 ft. size panel (about $10), then cut it in half to make (2) 3 ft. x 9 ft. pieces.

Drop Cloth

2. The panels are heavy enough, so I didn’t feel that a lining was needed, so I simply squared off the edges (drop cloth isn’t always perfectly straight), folded over the edges, and sewed all around.

DIY: Drop Cloth Curtain Panels

3. Once the panels were complete, it was time to add the decorative leading edge.  I chose a navy blue light cotton fabric which was the perfect contrasting complement to the lighter color of the drop cloth material.

And yes, that says $3 for the yard.  In all these panels cost about $13!

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COMThe color of the fabric is showing royal blue in this pic, but it is more navy in actuality.

4. I layed out the fabric length-wise and cut as many 4″ strips as I could.

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COMagain showing royal blue…  but it’s not.

5. Then I folded over the two side edges 1/2″ each and ironed the seam flat.

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COMThat’s the true color. I swear!

Sidenote: Because of the panel length (a typical panel can be from 84-96″ long), you may need to attach fabric strips to achieve one long strip. I did and before folding over and ironing the seam, I attached two strips and then I had enough length.  Once sewn, iron the seam flat.

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COM

6. Once the seams were ironed, it was time to attach the decorative edge to the drop cloth panel. I decided to have 1″ of drop cloth exposed, then add the navy blue accent.  I first pinned the navy fabric in place and sewed all along the edges using the same color thread.

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COM

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COM

And that’s it.  A high-end look for $13!

The result…

DIY: Drop Cloth Window Panels with Leading Edge Detail. High-end look for less than $20 to make. via @Jenna_Burger, WWW.JENNABURGER.COM

The panels are hung by clip rings and have slight puddle at the bottom.  They are the perfect addition for my dining space.

Other ideas + ways to achieve a high-end look for less…

  • You don’t have to use drop cloth to create a similar window curtain panel.  A similar detailed edge can be added to a store-bought curtain, similar to what I did in my daughter’s room.  In her space, I actually added the decorative fabric to the outside edge of the curtain panel instead of on top of the fabric.  The typical store-bought panel wasn’t long enough, but the added fabric made it the ideal length.

How-To Add Decorative Trim to Curtains {for cheap}

  • If you are using a thinner fabric to create a window panel and want to have a heavier panel that will allow less light to shine through, check out what I did in my bedroom.  Using drop cloth material (AGAIN), I took a regular weight cotton fabric and lined them.  Depending on the fabric pattern, a decorative edge could be added to these style panels as well.

DIY: How to Make Simple Lined Window Drapery Panels

Ideas are limitless for what you can create for your windows!

Thanks to Lowe’s, I was able to create my most recent creation for less than $15.  So next time your combing the paint aisle to grab some spray paint, don’t forget to check out the drop cloth section.  Your mind will go bonkers with all that can be created!

Excited for the Fall and ready to tackle some home improvement and DIY projects?  Lowe’s has it all.

Fall Badge Rectangle

Sign up for their free Lowe’s Creative Ideas Magazine, which is filled with ideas + inspiration!  Plus you can always follow them on Pinterest and Instagram for even more great ideas!

Disclosure: I am so grateful to be apart of the Lowe’s Creative Team and was provided with a Lowe’s gift card to purchase items for my project.  I was also compensated for my time to use the products.  No one told me what to create, what to buy, how to use the product, or what to write.  All opinions are 100% mine!

What have you made using drop cloth? Have you ever thought of jazzing up your window curtain panels to create a custom look?

 

How-To Add Decorative Trim to Curtains {for cheap}

It’s been fun to share a few of the many DIY updates that I made for my daughters new Big Girl bedroom, and today I’ve got another.

When planning out the room, I knew I wanted to keep the long window panels, but add some embellishments to dress em’ up a bit.

They are typical 86″ long panels that I purchased 2+ years ago from Bed, Bath, and Beyond and are a deep fuschia color with a small herringbone pattern. I always liked them but thought they were a wee-bit boring… until now.

Adding trim, a leading edge, or edge band, is a simple and inexpensive way to give an updated look and a bit of flair to any window treatment. Plus now my revamped drapes are unique and one-of-a-kind, and so can yours.

To get the look is pretty easy and costs only a few dollars.

The before panels were okay, but the after is “bam”!

To start off, the panels definitely needed to be raised alittle higher towards the ceiling (the higher the better), and adding a decorative trim band at the top, bottom, and inner side was the answer to give them a designer look.

I found this fun fabric for $3.97/yard, and one yard was just enough for the project.

To start off, I determined that I wanted a 3″ +/- leading edge band on the 3 sides.

I cut 6-1/2″ strips of fabric.

The fabric strips were not long enough for the length of the curtain panel, so I simply took the fabric ends, put right sides together, sewed, and ironed flat to create 1 long strip.

Once the long strip was created for the length and I cut two strips for the top and bottom (x2 for the other panel), I folded the strips in half (wrong sides together) and ironed.

I then aligned the unfinished edge of the trim fabric with the right side of the panel edge…

Sewed using a 1/2″ inseam….

And finished by ironing the seam flat.

After adding the leading edge band to the inner side, the bottom, and the top, it was time to focus on the corners.

Where the corners meet, I left extra fabric and rolled one side under the other to create a 90 degree angle. Then sewed the edge.

Pictures might explain it better. Take a look…

And here’s the result of my $5 Designer Update

O, I forgot to mention that I also updated the drapery rod too.  The before rod was purchased from Ikea years ago.  No reason to get a new one when a little spray paint does a world-of-wonder!

Hello to Gloss White.

If you happened to miss the whole space, it’s a true treasure.

It’s amazing with a little fabric and/or trim, how a typical store-bought drape can be jazzed up to look designer-made!

I’m pretty passionate about window treatments (call me crazy), and if you want to read/see more, I recommend you check out these posts:
Create a Layered Window Treatment
The Right (and Wrong) Way to Hang Window Drapery Panels
DIY: How To Make Simple Lined Window Drapery Panels